How to use Reliance Huawei EC321 datacard with Tata Indicom?
By Techalites | January 20, 2008 | Topics: How To... | |
Reliance netconnect and datacards are very popular in India and many of the people in remote areas where broadband facilities are still not available this is the only option for reliable internet faster than dial-up service of BSNL.
But unfortunately for last couple of months Reliance datacard speed is also have gone very bad and many times even connectivity is also problem. Other unfortunate matter is that reliance data cards are locked so evenif you have purchased it by giving them 5000 INR, you can not use it with other service provider like Tata Indicom or BSNL WLL.
With my experience, I can say that Tata Indicom CDMA Internet service is definitely better than Reliance netconnect and if you compare them simultaneously you will notice that it is almost 25% faster than reliance. So after a many research i decided to switch to Tata Indicom. But now problem was that i can not use my Huawei EC321 datacard with Tata as it has been locked by Reliance. So after efforts of 3 days i got the solution for that.
Here is hack:
Prerequisite: Huawei EC321 datacard which comes with RUIM slot, Tata T- Sim Card, Laptop with PCMCIA slot.
Procedure:
1) Download BitPim software from here.
2) Read the SPC code of your data card using it.
3) Download CDMA Workshop software from here. Leave comment below and i will send it to your email.
4) Install the software and insert your data card in PCMCIA slot.
5) Choose correct COM Port, Click on QCDM, and than read.
6) You will see all system information on screen.
7) Now Click on Other tab and and there in RUIM setting choose RUIM only.
It will ask for SPC code and you need to give it before changing any setting. Give SPC you have detected using BitPim.
9) Its done. Insert your T SIM card in the slot of data card and restart the device use software available on Tata Indicom website to connect to internet.
I am currently writting this hack using Tata Indicom service on Huawei EC321 data card provided by Reliance.
Leave comments here if you need further assistance.
Previous/Next Post
« Magellan Maestro Elite 4370 GPS | Home | MPIO MG 200 Media Player »
January 26th, 2008 at 4:47 pm
Hey,
Your Hacking Tips are very nice.
I am also a Reliance Netconnect User.
Do you have any user settings or hack so that I can surf net freely.
Please reply me via e-mail.
February 8th, 2008 at 8:09 am
Great post !!!!
Will it be possible to use a ZTE corporation data card of reliance to be used for a tata indicomm conection?. This data card also has a slot for a T sim…..
February 22nd, 2008 at 2:33 pm
HI the IDea Is great but i have tried . its not working . I hope i have not done any mistake while doing it . Pls help me out … I want to get a rid from RTl data card..
March 5th, 2008 at 3:42 pm
Chandrapal: Sorry but i do not have any hack right now that can help you surf freely.
Himanshu: Sorry for delayed reply. But can you give me more details about manufacturer, full data card name with number and version of firmware.
Vineet: Please give more details about what you have already done. And are you using huawei card or some other card.
March 7th, 2008 at 4:52 am
Hi, Please let me know if reliance datacard be used for other service providers like BSNL, Airtel and Hutch. You have mentioned it is possible for tataindicom(Which same CDMA technology as reliance), but what abt others which are GSMs??
March 16th, 2008 at 2:16 pm
Hi, I read your tip and liked. Tell me the SPC code are looking same like that which you highlighted in above shown picture in bitpim software. Also tell me what happan to the Reliance connection is it remain working or not. please reply. One thing more Can I use both the connection TATA and Reliance and how?
March 17th, 2008 at 1:50 pm
Hi, CDMA workshop does not seems to be working. Could you send me on my email? And where do I put in the SPC code?.
Regards.
March 20th, 2008 at 8:08 am
can u send me cdma workshop full version? or key???? plz mail me
March 22nd, 2008 at 5:27 pm
Pradeep: It is not possible with GSM network.
Sudhir: I do not have reliance connection right now so cant tell you but it catches network of reliance so possibly can connect to it as well. But no gurantee!!!
Adam/ ABhi: you can go on http://cdma-ware.com and download demo version which is fully functional.
March 24th, 2008 at 4:57 pm
Hi techalites
I read your sugession. In CDMA workshop at other Tab where is RUIM there is four options one of them is “R-UIM if available” can I use this option intead of “R-UIM only” when I click on read button it shows “NV only”
March 26th, 2008 at 1:37 pm
Hey,
Can u please tell me how do i hack the Reliance NetConnect USB Modem….
April 6th, 2008 at 11:26 pm
Hi I want to use my TATAINDICOM EC321 datacard with BSNL. is it locked ? what is the procedure of unlocking it ? pls mail me at arunbabu.gect(at)gmail.com
April 11th, 2008 at 2:45 am
Hi,
please mail me the BITPIM and CDMA workhop software,can I switch from one cdma network to another by using this software.
Thanks in advance
April 11th, 2008 at 10:43 pm
Currently I am facing one problem with Huawei Data Card EC321. Currently I am using Tata Indicom connection. Whenever my system goes to standby \ hibernate and then I wakes up laptop, Card stops working. It is having no light. It is the condition when there is Option->Allow Standby\Hibernate. Then only option is to restart laptop.
But when I selects Prevent Standby\Hibernate, on every wake up it displays message - USB device is not working properly or is no longer available. Then I need pull card out of PCMCIA slot and push inside again to start it working.
Is it problem of driver, some bug with card or software. Please help.
April 12th, 2008 at 6:28 pm
What I am able to understand is that the above said problem happens in case of Stand By. On allowing stand by mode, on every wake up it displays message - “Data Card does not exist or unavailable” along with USB message - “USB device is not working properly or is no longer available”.
April 12th, 2008 at 6:30 pm
What I am able to understand is that the above said problem happens in case of Stand By. On allowing stand by mode, on every wake up it displays message - “Data Card does not exist or unavailable” along with USB message - “USB device is not working properly or is no longer available”. Then solution is plug it out and push back in again.
April 13th, 2008 at 6:26 am
send me the cdma workshop link
April 14th, 2008 at 11:10 am
how to hack site & broadband
April 14th, 2008 at 12:54 pm
I got my datacard’s spc through bitpim. Used that in
CDMA Workshop and unlocked the ZTE datacard for changing settings. But when I changed the RUIM settings to ‘RUIM only’ and clicked write, I got Failed message. Why it is not able to write? Also what are verification #1 and #2. Do I have to enter anything for verification numbers?
April 15th, 2008 at 7:59 am
thank u for the Hacking Tips.
I am a tata indicom net user,using Huawei EC321,
do u hav any user settings to use both tata and rcom on same huawei card?
Please reply me via e-mail.
April 24th, 2008 at 11:43 am
Hello
Is it possible to convert Reliance huawei USB netconnect card to TATA ?
what is the requirement ?
please email if possible.
May 8th, 2008 at 8:27 pm
Hi,
I have Reliance Data Card ( MC315) is there posible to break this code and to connect with TATA sim card to access the internet?
May 9th, 2008 at 7:09 am
Dinesh: I am not sure about MC315 Datacard but it is definitely possible with EC 321 data card. What are the basics though you can follow? Get CDMA Wares software, connect it and record all settings on separate paper. Now try and find exact firmware version number of the data card you have. And try to find on internet if there is any updated version available for firmware. If you get one try to upgrade the firmware. By upgrading firmware you will be able to destroy data reliance has put inside and will automatically unlock reliance data cards. (First of all check weather your card support sim card insertion?).
Drop comment here if you need further help.
May 9th, 2008 at 7:11 am
Reliance huawei USB netconnect data card has SIM slot so if you anyway remove reliance settings from it and make changes in it to work with SIM card you can use it.
May 9th, 2008 at 7:12 am
VJS: No sir sorry but i dont have that hack. I will try on my mobile and will see if it can be done.
May 9th, 2008 at 7:14 am
You can recheck your SPC code again and see if it is correct. Varification codes can also be found through BitPim. Try to find out and see if you can get one.
May 9th, 2008 at 7:19 am
Hi,
I am not able to find the link to download the CDMA Wares software . Can you again send me the link please so that i can try it with the MC 315 data card
May 9th, 2008 at 7:56 am
Dinesh: here is thelink for you http://www.cdma-ware.com/
May 9th, 2008 at 8:39 am
Hi,
My Data Card uses COM 9 Port. But when i select that port in the CDMA-WARE software it says it is avaliable only for registered users. So i am unable to proceed further. Do u have full version of this software with you? Can you send it to me ?
May 9th, 2008 at 10:13 am
Hi,
I have done till the last above step but when i select–>Other->RUIM- RUMI-Only and click on start.
It is saying error message that “Failed. CANNOT TO DO EEPROM REBUILD.
Can you say what i am doing is wrong any where? Need your detailed explanation here please.
May 9th, 2008 at 6:23 pm
Dinesh: No i dont have full version. I have tried to get one but no success yet. Further your card seems to be difficult to handle. Simple thing you can do is find the latest firmware and install it on card to destroy all reliance data.
May 9th, 2008 at 6:30 pm
Hi,
I was seraching for that fireware for past 2 weeks to do that. Do u know any firmware software to destroy the Reliance data so that i can use for GSM connectivity
May 13th, 2008 at 8:54 am
it sucks!!!!!!!!!!!
May 13th, 2008 at 5:14 pm
Hey Nayham!! Please tell me your problem if i can help you out in anyway.
May 14th, 2008 at 6:56 am
Hello Sir, i am havin Huawei EC325, I want to use reliance ruim in it, sir as you have told to use BitPim, im facing a problem in it when i connect my data card in any port like COM 4, COM, 7, COM 11 etc. And when i click on ‘Find phone’ button in BitPim, it shows an error ‘Faileled to connect to the phone(some thing like that, sory i dont remember the exact error), in short im not able to read the SPC of my Huawei Ec325, please help Sir…..
(sory if i have posted it second time)
May 14th, 2008 at 7:07 pm
Dear Rashmyn, As such i am not that much technically sound with bitpim. Most of people usually do not find it difficult. But i think they have very good explanation on their website which you can refer. They also have presentation and faq with troubleshooting on their website. Please go through them and do let me know if you need further help.
May 15th, 2008 at 5:09 am
Rashmyn: What you can do is? First insert ypur card in notebook. Start Bitpim. It will automatically find phone. It it can not than manually find phone. On COM Port select one by one coms and in type of handset select other CDMA. And try to see if you get system folder coming up in navigation on left side.
May 15th, 2008 at 5:12 am
Dinesh: Sorry for delayed reply but your earlier problem is usual you will get two error saying varification #1 #2 and what you need to do is just press OK. After that change the appropriate RUIM setting from dropdown and press write button. And you are done.
DO let me know if it works.
May 15th, 2008 at 7:53 am
Getting the SPC code is the problem here. I have tried all the possible option and i dont know how to find SPC code. I have also refrred BITPIM help and site but none is helpfull. If you explain how to get SPC code then it will be better.
May 15th, 2008 at 4:25 pm
Thanks for this guidence sir,
bit still the problem is same, i tried to us bitpim in both pc and laptop, when i put my huawei ec325 and run bitpim, its not able to find my data card, even if i configure it as ur guidence, in settings i sellect other cdma phone, an give the correct com port, after that also the same error appears, now what should i do sir…….
is there any other software to read SPC?
May 21st, 2008 at 5:43 am
I am also a Reliance Netconnect User.
Do you have any user settings or hack so that I can surf net freely. pls tell me.
Please reply me via e-mail.
ajay_hi2@rediffmail.com
May 21st, 2008 at 7:03 pm
Hi,
I’m using reliance net connect.
but i want it to use with bsnl.
is it possible if yes how pls reply
May 24th, 2008 at 7:49 am
Hi
I have Huawei ec325 with reliance net connect.Can I use tata indicom connection with this and how?
Please advise
Thanks
May 24th, 2008 at 6:09 pm
Dear Faujdar I will be publishing this tip very shortly. SO subscribe to RSS Feed or my newsletter.
May 24th, 2008 at 6:10 pm
I am not sure if bsnl provides RUIM card or not. If they provide it you can definitely use it in reliance card.
May 24th, 2008 at 6:12 pm
Dear Pratyush, For surfing Reliance netconnect unlimited freely, we do not have any tip or hack right now. But you can subscribe to my newsletter to get it in your inbox once we discover it.
May 28th, 2008 at 6:34 pm
I performed the steps as you mentioned and everything went fine. But after inserting tata RUIM there is no network. Please guide
May 28th, 2008 at 6:40 pm
RUIM card is a special Tata Indicom card or usual tata indicom sim
May 29th, 2008 at 5:43 am
Mandeep: its simple tsim card provided by Tata Indicom.
May 29th, 2008 at 5:43 am
Try to get latest firmware of your device (which i dont know) and you are done.
May 29th, 2008 at 5:46 am
HI,
I had a EC321 data card with reliance. However i got the same No converted to a USB modem. Now i want to have a reliance number to use the same data card. Is it possible that i buy a reliance simcard from the webworld and use th data card. If yes, would i need to use the above procedures to change any settings. Please suggest.
Thanks Ameya
May 29th, 2008 at 8:08 am
Thanks Techalites After upgrading Firmware its working for me. Great Hack.
Waiting for some other hacks from you.
May 29th, 2008 at 9:48 am
I have a reliance net connect USB device Huawei EC325, please tel me hw do i use tata indicom connection with it?????
May 30th, 2008 at 8:33 am
Dear Ameya: i doubt that reliance will ever give you sim card alone. I have trie once to get sim card alone but failed. But you can use above trick and use Tata TSim card in that which is easily available.
May 30th, 2008 at 8:34 am
Dear Ritesh: Upgrade your firmware and follow steps given in post i have written and you are done.
May 30th, 2008 at 9:07 am
HI,
Thanks for the reply. Do i just buy a regular simcard with a postpaid package of probably 199 or 349. Do i need to get any internet package activated as well. I am a bit confused as to how will they bill me for internet usage. Do i have to ask them to activate any package like net connect in Reliance. Kindlt throw some light on that aspect.
Thanks & warm regards
Ameya
May 30th, 2008 at 11:39 am
Go to TataIndicom website where you can see plenty of postpaid and prepaid packages. See what suits you best and than buy tsim card accordingly. If postpaid yes you will be required to buy specific plan when purchasing t sim card.
May 30th, 2008 at 7:57 pm
Hi Techalites
Do you have Nokia 2112 Flash files?
I want to convert 2112 Non-RUIM to RUIM.
May 31st, 2008 at 3:19 am
No sorry Mandeep, i only have experience of Data Cards. I am not a professional.
June 3rd, 2008 at 7:07 pm
Hi techalites
One more question, there were several options like RUIM only,NV only,RUIM if avail,GSM on 1x.
Does this means it can also be converted to GSM?
And later again to RUIM
June 4th, 2008 at 9:04 am
Yes if your device support GSM connectivity. As far as i know EC325 supports GSM as well but EC321 does not. But check for official specifications on manufacturer’s website
June 4th, 2008 at 2:33 pm
nice deal dude. I have one EC321 and EC325 that is locked to a network with there PRL file. how can this be bypass.
June 8th, 2008 at 7:01 am
Hi ,
I tried your way and change to RUIM IF AVAILABLE ,
but as i insert r uim into slot it not show any network sinnals . show only NO NETWORK ..
What is the problem ??
June 8th, 2008 at 7:08 am
Hi I use your technique ang change it to RUIM IF AVAILABLE ..
BUT WHEN I INSERT R SIM INTO IT (EC 325 MODEL )IT NOT SHOW ANY SIGNAL AND SHOW NO NETWORK SIGNAL.
IS THERE CHANGE I HAVE TO MADE BY CDMA WORKSHOP . ? PLZ TELL ME IS THERE ANY CHANGE HAS TO MADE WITH PRL OR ANYTHING ?
June 10th, 2008 at 11:41 am
Shreekant: Kindly upgrade your Huawei ec325 data card firmware from hutch thailand website and than use the CDMA workshop.
June 11th, 2008 at 10:48 am
Hello.
Firstly THANK YOU for sharing this. I am SUFFERING in silence with Reliance - their speeds are slow and they charge a fortune. Letters to them to disconnect my service are ignored and bills keep coming - I feel very cheated by these bandits.
I was long wondering if there was a way to do exactly what you have said above. Only thing is, I have an EC325 Data card (Huawei) Could you please guide me as to how i may hack this to work on Tata indicom ?
Many thanks
nk
June 12th, 2008 at 6:26 pm
Hi Techalites
I used your trick and working properly. After changing I also use R SIM into my card. Will u give me any trick so that I can use this card with GSM networks. I also want to know that how many times CDMA workshop used. I used in one month earlier but when I use no it says “Your trial period is expired”. please let me know how much time demo software is used. Please let know as soon as possible.
Thanks
Sudhir
June 13th, 2008 at 2:48 pm
Sudhir: I dont have any trick for GSM. CDMA-workshop is trial only and if you want to use it again, redownload it and try to use. If you can not what you can do is format your computer . After formatting you can resue it. There may be another way but i know this one only.
June 16th, 2008 at 5:11 am
Hey…
This stuff sounds good. I would like to have the bitpim software and the cdma workshop software.
But can’t see them anywhere on the displayed page.
help me out with that asap.
June 17th, 2008 at 1:39 pm
HI,
I HAVE READ DIFFERENT COMMENTS AND FEEDBACKS OF URS.I AM USING EC321 WITH RELIANCE.CAN I USE AS FAX MODEM TO SEND AND RECEIVE FAX FROM LAPTOP LIKE AIRTEL GIVES IN SELECTED AREAS.PLS ADVISE,
THANKS N REGARDS,
AJAI
June 18th, 2008 at 2:09 am
hi techalites, i’m also using ec325 and found the same problem with others when trying to read the spc using bitpim, bitpim simply didn’t recognized my ec325. when i tried to list the phone model that bitpim supported, ec325 was not listed in it.
June 28th, 2008 at 12:19 am
CDMA Workshop 2.3 s/n
June 28th, 2008 at 11:46 am
can i have the software to unlock EC325 locked to reliance.
also I have a ZTE MG880 locked to reliance but no signal. i want to unlok and try it with TATA. ca u help?
June 28th, 2008 at 4:43 pm
I dont have serial no for CDMA Workshop but trial or demo version is fully functional for 30 days i guess.
June 28th, 2008 at 4:44 pm
You do not require any software. Just upgrade your firmware and than use cdma workshop as have already mentioned in post.
June 29th, 2008 at 4:49 am
Will it be possible to use a ZTE corporation data card of reliance to be used for a tata indicomm conection?. ZTE is a USB connection. Please revert !!!
9820020524
Hasan
June 29th, 2008 at 11:13 am
Unable to find the SPC . what phone model to be selected?
June 29th, 2008 at 11:16 am
Where can i find SPC in bitpim . PLease explaim using bitpim step by step.
Thanks
June 29th, 2008 at 5:28 pm
hi techalites, i’m also using ec325. but,their speeds are slow very much. you have the software or firmeware to unlock EC325 for hi-speeds (2mb-> up)or use other network.
Thanks.
June 30th, 2008 at 8:46 am
Again another sufferer with EC321 of Reliance trying to switch to Tata indicom.
Need CDMA workshop software .Shows demo can that be okay.
Thanks in advance
June 30th, 2008 at 9:18 am
downloaded BITPIM and ran.Does not detect card EC321.category Huawei not listed Pl.Help category to find SPC code.Port is detected with Huawei EC321 card as COM7.
June 30th, 2008 at 7:09 pm
download
July 3rd, 2008 at 8:32 am
Hi!, I’m hendra from Indonesia.
I’m also using EC325 which is bundling with one of local Provider (Esia by Bakrie Telecom). How can I use your way to unlock and use it for another R UIM card (other provider too). I’ve already using a EEPROM or some kind of Flash Updater for the device.. but sometimes it can’t read the card and sometimes it can..??? How can I fix this problem??? please help!
July 3rd, 2008 at 8:48 am
I am unable to have my Ec321 card detected on bitpim.Cdma workshop does not allow reading/writing unless registered for a fee that is more than the cost of a new card from tata.I have downloaded Ec321 s/w normal from huawei.when inserting card it updates to reliance data.I have managed to read ESN no and also let the card have tata software.what further needs to be done.Thanks.
July 4th, 2008 at 5:35 pm
Hi,
I’m currenty using the snail-speed reliance connection using my ZTE CDMA 1X card. Is there anyway I can reprogram the card to work with the BSNL which also uses the CDMA technology so I wont have to spend another Rs 4500/- to get a connection from BSNL. Thanks in advance…
~Anu
July 6th, 2008 at 5:09 pm
Hi,
Anil ambani (Reliance Communication) is cheating public in every way possible. Heard from my friend, they promise engineers salary bonus but later refuse to pay up.
Beware of Reliance!
July 7th, 2008 at 6:43 pm
Hi .. i have huawei ec325 and also data card mc 315 of zte …both are reliance. i want to use my tata indicom tsim into them ….i tried many times but by default query goes on reliance servers though i have inserted tata card….so i didnt get any solution for that… and i have download bitpim but it cant connect to the device..i m getting all ports i have tried all diff. but no synchronization between software and device…so if possible plz give some advice from screenshots …or as u like …but plz reply soon on email…and give another copy to this site …bcz every1 can get benefit from it …
thanks ..
July 8th, 2008 at 6:50 am
I am also very upset with Reliance datacard service and looking for the solution. It is my heartly request that Please send me copy of CDMA Workshop full version if you have.
Thanking you.
July 9th, 2008 at 9:05 pm
Your Hacking Tips are very nice.
I am also a Reliance Netconnect User.
Do you have any user settings or hack so that I can surf net freely.or
I have Huawei ec325 with reliance net connect.Can I use tata indicom connection with this and how?
Please advise
Email me . its urgent boss
Thanks
July 10th, 2008 at 7:45 am
Do you have any user settings or hack so that I can surf net freely.or
I have Huawei ec325 with reliance net connect.Can I use tata indicom connection with this and how?
Please advise
Email me . its urgent boss
Thanks
July 10th, 2008 at 2:54 pm
i want to shift huwai ec 325 reliance net connect to tata indicom ,can you help me
July 11th, 2008 at 4:42 am
Hi
I have reliance Data Card Huawei ec325. This has been provided by my company. unfortunately, I am unable to open job sites using this data card. It always says that it is blocked. Is there anyway to unblock the sites and use net freely?
July 17th, 2008 at 3:21 pm
the simplest way to unlock is to reload firmware,its available in hutch-thai website
July 18th, 2008 at 7:26 am
how to use Huawai EC 325 data card net connect to Virgin Sim Card? Plz Help!
July 19th, 2008 at 2:30 pm
http://bsnl-data-card.blogspot.com/
July 20th, 2008 at 1:48 am
dear techalites,
i’d tried to change the RUIM, but nothing happened, how to restart ec325?
thanks.
July 20th, 2008 at 9:30 am
Hi,
I am usingzte ITG880 datacard of reliance netconnect i want to switch to tata how.
Please guide me.
July 21st, 2008 at 8:15 am
Hi Techalites
I use your trick and change my EC321 to RIUM if Available it is working when I use Relience prepaid card but wnen I use Tata prepaid card it is not working. Please tell me is it working with prepaid or not.
July 25th, 2008 at 10:10 am
pls send me
CDMA Workshop software
July 25th, 2008 at 6:43 pm
pls send me CDMA Workshop software
July 27th, 2008 at 2:18 am
Hi Techalites
After using ur trick my EC321 is changed to “RUIM only” but when I insert prepaid T-SIM card into the slot and start application it shows no signal/no network why it is happning. I also tell you when I insert Reliance prepaid sim into the slot it works. Can you tell me what is the mistake remain in it. Please help me soon as possible. I am very greatfull if you give me your mobile No. or phone No..
Thanks
Sudhir
August 4th, 2008 at 11:35 am
Thank you techalities…….my huewai EC325 is now wrking wid Tata Sim card……updatig the firmware didnt really wrkd out…..i just followed the steps u hav defined here……..nd itz wrkin fine nw……
August 5th, 2008 at 12:42 pm
Ritesh, I am able to call with tata indicom card in reliance net connect EC325 after unlocking it but unable to connect internet will you please guide me why this is happening? dial number #777 username-internet, pass internet but unable to connect remote computer did not respond.
August 6th, 2008 at 10:50 am
YES durgesh…….
just follow the above steps nd ur done….
first find ur SPC code thru BitPim…….then Open CDMA wrkshop……select the port whr ur device is connectd…..nd connect CDMA to ur device……now browse to Security -tag…..give ur SPC code in the box…nd click…SPC…u ll get a message…click OK…..then…browse to Other-tag….click the Congif -dropdown-list,and select RUIM-only….give sme 6-digit number in the verification boxes 1&2….and click write…..and u r done….now browse to Main -tab…click disconnect….nd u r done…..nw unplug ur device ..insert TATA sim….nd plug it again…..nd u r ready…open the Huewai TATA software….nd connect…..
August 6th, 2008 at 10:53 am
if u want softwares of TATA…nd Firmware update of EC235……mail me at riteshsingh0303@yahoo.com….
August 6th, 2008 at 12:52 pm
thanks Ritesh, I have done it. but can you tell me that whether it is possible to Use airtel with it?
August 6th, 2008 at 12:59 pm
No Durgesh……i dun think u can use a GSM sim…with CDMA phones……
August 8th, 2008 at 10:39 am
Hi Ritesh
as you wrote what is sme verification code where it find I have EC321 reliance data card
August 9th, 2008 at 8:53 am
Hello
Is it possible to convert BSNL huawei USB DATA card to AT TATA OR Reliance CDMA MOBILE ?
what is the requirement ?
please email if possible